Free Delivery with all Chevron Kits

Chapter 8 Chevron Guide

Quick answer: Chapter 8 rear chevrons are upward-pointing stripes of red retroreflective material and fluorescent yellow non-reflective material, each at least 150mm wide and angled at 45 to 60 degrees, covering as much of the vehicle's rear as possible without blocking windows, lights or the number plate. For vehicles working on roads over 40mph, the red should be Class R3B prismatic material. Class R2 is only acceptable for vehicles working on roads under 40mph, and Class R1 is not recommended for works vehicles.

What is Chapter 8?

Chapter 8 is part of the Traffic Signs Manual published by the Department for Transport. It sets out how to keep road workers and other road users safe at road works and temporary situations, including how works vehicles should be marked so following traffic can see them clearly, day and night.

The rear chevron is the best-known part of it. The fluorescent yellow stands out in daylight and at dusk, and the red retroreflective material lights up in headlights at night.

Is Chapter 8 a legal requirement?

Chapter 8 is guidance and best practice rather than legislation in its own right. In practice, most highway authorities, councils and main contractors only allow Chapter 8 compliant vehicles on their sites, and employers still have a duty of care to their staff under health and safety law. If you work on highways contracts, expect your client to check your vehicle markings.

Heavier vehicles are different: motor vehicles over 7.5 tonnes and trailers over 3.5 tonnes must, by law, carry rear markings in line with the vehicle lighting regulations, as well as any Chapter 8 markings.

Which vehicles need Chapter 8 chevrons?

Any vehicle that stops or works on the public highway for works or inspection purposes, on high-speed roads in particular. That includes highways and street works vans, utility and telecoms vehicles, council fleets, traffic management vehicles, recovery vehicles and survey or inspection cars.

  • Cars and vans under 7.5 tonnes: rear chevrons, red retroreflective tape on rear-facing edges of open doors, guardrails and equipment lockers, and a 50mm yellow prismatic reflective strip along each side.
  • Vehicles over 7.5 tonnes (tippers, gritters, sweepers, recovery trucks): rear chevrons as well as ECE 104 contour markings on the rear and sides, and ECE 70 rear marker boards.

The Chapter 8 chevron specification

  • Alternating stripes of red retroreflective and fluorescent yellow non-reflective material
  • Each stripe at least 150mm wide
  • Angled at 45 to 60 degrees to the horizontal and pointing upwards
  • Covering as much of the rear-facing part of the vehicle as possible, without covering windows, lights or the number plate
  • If equipment on the vehicle (such as a crash cushion or cone-laying kit) hides the chevrons, the rear face of that equipment needs markings too
  • Maintenance vehicles also display the HIGHWAY MAINTENANCE sign to the rear (MOTORWAY MAINTENANCE may be used on motorways)

Reflective material classes: R1, R2 and R3B

The class describes how much light the red material reflects back to drivers. The higher the speed of the road, the higher the class you need.

  • Class R3B (prismatic): recommended for vehicles working on roads over 40mph, including motorways and dual carriageways.
  • Class R2: meets the minimum requirement for vehicles that only work on roads under 40mph.
  • Class R1: not recommended for works vehicles.

If your contract or client names a material class, always follow that.

Our material grades and which to choose

  • Engineering: our entry-level grade, Class R2. Suitable for vehicles that only work on roads under 40mph.
  • Premium: Class R3B prismatic material, for vehicles working on high-speed roads.
  • Premium +: an upgrade option between Premium and 3M. Ask our team for the full specification of this grade.
  • 3M: made with 3M Diamond Grade reflective material, which 3M states meets and exceeds both Class R2 and Class R3B. Our top grade for fleets on motorways and other high-speed roads.

Not sure which grade your contract needs? Get in touch and our team will tell you.

Planked or Flooded: which layout?

  • Planked: separate red and yellow strips in the traditional Chapter 8 pattern.
  • Flooded: solid fluorescent yellow panels with separate red reflective strips, for a quicker fit and a stronger finish.

Both layouts give you the same Chapter 8 chevron pattern once fitted. Most of our vehicle kits come in both, and you choose on the product page.

Side markings

For cars and vans, add a 50mm strip of yellow prismatic reflective tape along each side of the vehicle. For vehicles over 7.5 tonnes, use ECE 104 approved contour tape to outline the rear and sides. You can find both in our conspicuity tape range.

Fitting your chevron kit

Every vehicle-specific kit from us is pre-cut to the shape of that vehicle's rear and comes with a step-by-step fitting guide and 16 free reflective lozenges for the vehicle's leading edges. For the best result, fit onto a clean, dry and grease-free surface, and press each panel down firmly from the centre outwards to push out any air.

Frequently asked questions

Do I need R3B chevrons on my van?
If the van works or stops on roads over 40mph, yes: Chapter 8 recommends Class R3B red material. If it only ever works on roads under 40mph, Class R2 is acceptable.

What angle should Chapter 8 chevrons be?
Between 45 and 60 degrees to the horizontal, pointing upwards, with each stripe at least 150mm wide.

Can I use plain red reflective instead of chevrons?
Chapter 8 also allows a solid block of red retroreflective material on the rear, but chevrons are by far the most widely used and recognised marking for works vehicles.

Are chevrons needed on the sides of the vehicle?
No. Chevrons go on the rear. The sides need a reflective strip (50mm yellow prismatic on cars and vans, ECE 104 contour markings on vehicles over 7.5 tonnes).

Do you supply fleets and sign companies?
Yes. Apply for a trade account to see trade prices when you are logged in.

Do you have a kit for my vehicle?
We have pre-cut kits for hundreds of cars, vans and pickups. Browse all chevron kits or search for your make and model. If yours is not listed, contact us.

This guide is a summary of the Traffic Signs Manual, Chapter 8, and industry guidance on vehicle conspicuity. Always check the specific requirements of your client or contract.